Notes On Making A Tricopter Essay Example for Free

notes On Making A Tricopter EssayMaking a Quad- or Tri-copter is a project Ive been tempted by for a long time. Ever since I got an RC heli, which Ive since abandoned. The Heli was too hard to move, and there wasnt much motivation to persevere having learned, either you burn down unfeignedly do is aerobatics, which Im not real interested in. A quad, on the other hand, is easier to fly and much more flexible I could add cameras, sensors, telemetry, code it to do interesting things, etc. And dozens of mountain have a bun in the oven done this so its an easy thing to Google round. The tricopter seems the most appealing so far interesting build, nice balance of stability and maneuverability. Interesting things so far* Design considerations for beginners* electronic computer to check if a given set of components will lap up together (looks awesome) * Arducopter if I dont have success coding an Arduino myself, or its too hard, or I want the traits without all that work * UK-based Arducopter store* Useful FAQ on frame design, and some other bits* Video on mental synthesis a tri from scratch* Complete build head up from the rcexplorer.se dude (v2.5)* And the next version along, v2.6 HV* Newbie FPV guide* Open-source plans for the RCExplorer frame* Discussion on various FC boards* The KK board is also an ATmega I did not enlighten this. Lots of resources here.* A lot of tips and links on this RCGroups thtake* Massive flight controller feature comparison table (possibly not up to date)* RCExplorers tricopter setup guide* Forum for UK-based FPVers* FPV advice/support/ bear on group* Credible explanation of the CAA regulations covering model aircraft (with and without FPV) in the UK* Another explanation of frequencies and their legality, also from FPVUK* bounteous set of videos about FPV theory and builds* Company selling uk-legal FPV gear, and it sounds like theyre helpful too Ill update this post with more block.Design notesFrameI thought there w ould be math (shuddder) about frame size vs prop size vs motor king and all that sort of thing, only when this FAQ says the main considerations are maneuverability and stability. A smaller frame is more nimble but less(prenominal) stable, and vice versa. Since Im a beginner, a larger, more stable frame seems like a good idea. It also seems plausible that its a better platform to develop from I could possibly add bigger motors/props to increase lift, for example, without having to change the frame. (Guess). The RCExplorer v2.6 arms are 480mm, which seems a good vagabond to start. I think Ill also use the frame design from RCExplorer as its hygienic proven and designs are available.Some tips from this thread* Prop wash over the arms causes vibration. Try to get on the props at least as far above the arms as the prop radius. * ESCs (unsurprisingly) work better if kept cool. Perhaps worth mounting them in the prop wash?PropsNot much headway on this yet. RCExplorer (again) recomme nds the smallest props you can as smaller props are hoy and have less air resistance, making them more stable. Trial and error seems a sensible plan of attack here, as long as the prop doesnt overwork the motor.Control boardFrom this table, Arducopter seems both very functional and reasonably priced. Lots of resources for it too. Beyond (advanced) features (that I wont need for ages, if ever), I keep mum dont have a clear idea what the pros and cons of the various boards are, though. For example, noob-friendliness, ease of repairs. The KK board does have a screen to guide you through the process, which might make it preferable to start with. And its cheap, so easy sufficiency to replace with something more feature-rich later.ESCsThere are so many important bits of schooling in the big tips thread that its not really worth reproducing them here. Just go read it. Use NiMH mode even for a LiPo battery, because the low-voltage mode engaging (to protect the LiPo) causes flips (eek). MotorsRCExplorer uses these for the v2.5. Mentioned elsewhere too. Is 750kV enough? What are the considerations? BatteriesTBCVideoNot planning to do this immediately, but from reading so far, there is stuff worth noting. Apparently, the only legal frequencies for airborne video tx in the UK are 2.4 and 5.8GHz. These are very ill-judged wavelengths with poor penetration and are limited to 10mw and 25mw respectively. This sounds totally dreadful, but people do claim that they can get decent range (up to a mile) with a high-gain antenna. A significant number of other people are (unsurprisingly) completely flouting the law. It does seem a bit OTT.Obtaining an amateur radio licence makes no deflection as they do not include airborne transmissions (out of date but probably still true Amateur Radio (Foundation) Licence Terms, Provisions and Limitations Booklet BR68/F, para 2(6)). Possible exception higher power 5.8GHz transmitters at 250mw rather than 25mw. It seems that to stay legal y ou can only use 2.4GHz or 5.8GHz. My transmitter is 2.4GHz and I dont want to replace that with an (obsolete) 35MHz transmitter. So it seems its 5.8GHz or bust. Telemetry, sensorsIll think about these later.Transmission of telemetry data is permitted on 433.05 to 434.79MHz up to 10mw.